When it comes to installing certified windows and doors, one can try to confuse ideas. So I decided to make as much clarification as possible
Out with the old ...
... and through the light.
It is possible to replace windows and improve the comfort and style of your home on your own without the help of an expert, or are you down?
"If you have decided to start asking everywhere about replacing your old windows, why are other issues draining or condensing?
and you want to avoid burning your hard savings like toilet paper ... then I'll reveal some secrets on how to get the best results in the easiest and fastest way possible above "
Replacing windows, easily how it works: the 3 steps to renovating new windows and doors.
The process of replacing old doors and windows can be divided into three stages:
1) choice (of product and supplier and distance)
2) installation, how and when
3) warranty, service / assistance.
Hi, I'm Athena, Civil Engineer at STYLETECH.sa, and a while ago, searching the internet, I found several dilemmas of this type:
Here's an overview of what happens with windows in general and with each step:
Step 1: the choice
As you leave and search for the right window, you will start with>:
diligently press the keys to search the internet for all the knowledge about windows and doors, products, applications, views listed, suggestions, and realize how much they do to you.
Or again, you will send a request to a website that is of a general opinion that will contact you with a potential local vendor, his own or not, who will know you for a SPECIAL price. Too bad because the price will suddenly and magically rise "because we obviously didn't understand each other so well, and so on".
You could even go to the frame maker so you can save time and money on the whole, of course!
... but you have to go all the way because door and window manufacturers have medium to bad call center and help desk offices that usually answer you from the most unlikely places in the world (for them, quantity counts and not the quality that you already have a certain percentage of problems that can and will exist, your problem).
The specialized showroom of doors and windows remains to be seen, here you will be greeted by a beautiful young girl who will explain in detail all the products sold, but usually after two hours and a river of words and phrases, with a head that ready to explode, you will never tell what is the most appropriate solution and the right frames for you.
How can he tell you the right version if he has never seen your home? is not aware of the specific situation of your frames, the purpose of each seller is to close a contract quickly and earn a commission on sales.
In these stores almost 90% you will never find the owner or the right technician to ask for explanations and suggestions for your frames, as they are usually very busy around the projects, there is no way to discuss them.
Relatives and friends, yes they too play an important role in the selection, for experience and their opinion is important, at least not to say that you have done everything wrong every time they come home for dinner, and the problem will arise if the friend doesn't do you any good, and that's usually the case:
1) You lose your friend (unfortunately the relative is not possible).
2) You did not get the ordered frames.
Wouldn't it be better to turn to a family owned company with all the necessary equipment and staff, and possibly even challenge the contract because the work was not done against the agreed documents and in the right way?
How to proceed though:
(THE SOLUTION) ... my advice is to go to a small well organized company that will actually follow you to insist on the best, from concept design to installation and with a daily presence at the construction site.
It will take care of you and not leave you alone, because you are a typical customer rather than a mid-sized company and you make a contract of less than 20,000 Euros, which usually does not listen to you anymore.
A small family-run company will do less work that you might like for your home, but it will do better.
First of all, the right craftsman will come home and make a FREE measurement to understand the reality of your frames and problems, and then propose the right product for you and the most efficient window assembly system and not only.
Forget about the internet, where you will find almost everything and the opposite of everything, you are unfortunately not an expert and the over-information will prevent you, instead of always consulting a professional and making sure that the person in front of you is a smart manufacturer technician and not just a seller or product.
Step 2: Installation
Installing new doors and windows means:
you may have already heard from others that it is possible to assemble without worries, or
they told you only about the product and not how to install the window or door or your window, what you do not know is that your home needs to be ready for new windows, so you need to create an installation plan : all fine, true ... no one does!
But especially me what can I do for you? What needs to be implemented as a skill to solve your problem once and for all, understandably and easily?
Before proceeding to this point, it is necessary to mention the reasons that led me to the creation of the Styletech tock to me. This short story will explain how I came to embody this unity in the company, its inspirational principles, and finally, what I can do for you.
Before leaving your thoughts, I want to conclude my speech by giving you some other simple tips so that you too can have all the useful information to decide clearly and in detail on your choice of frames.
As with all things, even in the case of replacing your old windows, the first concern that comes to mind is that of installation, assembly and installation.
Yes, because as with any material, good or bad, beautiful or ugly, the real difference between one and the other is precisely the comparison between them.
On the other hand, imagine if one of the best example car brands… .s, valued for the quality of its parts, was poorly assembled. The bad result would be shocking, at least, despite efforts to produce good quality materials.
However, this is also the case for frames and sometimes not so expensive.
It is no coincidence that today I am talking to you about installing certified windows and doors: that apart from the quality of the individual materials manufactured, it is always important to consider the assembly phase of each small or large production unit. If something is wrong here, then it will be pain.
To get the most out of customer concerns, some of my colleagues usually try to reassure you by talking about a proper installation and, in some cases, a dedicated installation just for you.
These courses are repeated every three years, and if a retailer wants to modify something from the list of their affiliates, they must immediately notify it to ensure the continuity of the training process and subsequent audits.
An experienced technician from the ift institute and always the quality manager of the Styletech department performs a first on-the-spot check to verify the technical documentation and compliance with the assembly instructions and to evaluate the quality of the work done to date. If all the required parameters have been met, the ift Institute can issue the certification of mounting of frames, valid for five years.
Subsequently, audits will be continued annually by the Styletech control department to ensure high quality standards applied with the ift.
At least once a year our company carries out an inspection during which compliance with manufacturing processes, related documents and in particular for multiple installation locations, quality of assembly and fittings, which must be carried out in accordance with the types of certified applications above ift.
What are the benefits of a certified window and door installation?
The best elements of the installation are already defined and specified at the time of order transmission
Mounting installers are prepared and updated on materials, methods of use based on developments, types of application, characteristics of mounting materials and their proper behavior
The certified installation of frames always guarantees optimum thermal and acoustic insulation and high sealing in the area of window and door fixing by our workshop
Our suitably qualified and qualified installers have the necessary know-how to operate professionally on-site at any time.
Styletech installers attend periodic training and information courses on new products and series featuring etem, rehau, aluminco, europa, installation techniques and methods, new assembly materials and other essentials
Styletech placement certification translates into an even better market offering with clear results for each customer individually: the terms "guarantee" and "quality" Styletech have a specific and measurable answer, defined by precise parameters set by an independent independent certification body. aluminum and pvc interior and exterior home.
Then someone else, more trained and more experienced in windows and doors, spoke to me, like me, about installing certified windows and doors that his or her company or another company produces.
You may have never wondered what is the most appropriate system for solving your problems with windows and beyond.
Well, let's try to say it simply.
And I'll ask you a question.
If you had to decide to invest the money you earned with so many years of hard work and hard work, who would you trust?
Will you entrust your money to a benevolent friend who does not control any manufacturer and who, however, says that he is your relative and can only want your good?
Or would you prefer to have your money assigned to a manufacturer that is controlled by others through a rigid system of rules, measurements, controls and procedures, estimates and close supervision by the relevant departments of each ministry?
Comparing money is not accidental and it is not accidental.
You know very well that buying good window doors today requires a great deal of investment and relying on improvised improper people would be like throwing your money out of the window for so many years.
But let's go back to our certified window and door installation.
There are so many who are talking about special installation or training.
I, or Styletech, have always told you about the CERTIFIED position.
But who is right?
What are these differences?
I know you very well hope that, with all of this, I have always mentioned them with impartiality and detail. And I'll do it again this time.
The difference between a certified installation and a specialized installation is all in the sense of the investment I mentioned above.
While the certified installation of a company meets the exact standards that a particular process has created, the proper installation meets the general standards.
In short, certified installation of windows and doors in detail is another matter entirely.
Unlike the specialized installation or even more generally the installation in a work-like manner, the certified installation is controlled by an exterior designated body.
Let me also explain better: to determine how windows and doors are installed, application plans are sent to the Rosenheim Institute ift abroad to evaluate and approve the installation's technical details and not only.
All production site protocols and the list of assembly managers and installers of each frame apply.
The next stage is the excellent training of technicians, who must attend all the special courses to learn the instructions and determine the rules of operation of the ift Institute.
If you live in Athens, Attica or territory, and need information or want to request a quote for our special glasses, click here: https://www.styletech.gr/or mail: after.sales@styletech.gr
Best wishes,
Athena, Civil Engineer.
